|
|
|
National Stock Number:
5305-01-026-0798
Federal Supply Class:
5305
National Item Identification Number:
010260798
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| FF-S-92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS24693-48 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS24693-48B | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS24693-48B | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | HEAD DIAMETER | 0.285 INCHES MINIMUM AND 0.332 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 3C STYLE | | SCREW MATERIAL | COPPER ALLOY 230 OR COPPER ALLOY 240 OR COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 342 OR COPPER ALLOY 353 OR COPPER ALLOY 270 OR COPPER ALLOY 274 OR COPPER ALLOY 360 | | SCREW SURFACE TREATMENT | OXIDE | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-495 MIL SPEC SINGLE TREATMENT RESPONSE | | THREAD CLASS | 2A | | THREAD LENGTH | 0.210 INCHES MINIMUM AND 0.303 INCHES MAXIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNC | | THREAD QUANTITY PER INCH | 32 |
|
|