|
|
|
National Stock Number:
5305-01-022-8054
Federal Supply Class:
5305
National Item Identification Number:
010228054
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| AA55623-232 | 18350 | PALL AEROPOWER CORPORATION | | FF-S-92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS18211-105F | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM | | HEAD DIAMETER | 0.333 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | SLOT | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 3S STYLE | | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-20693,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE | | SCREW MATERIAL | PLASTIC POLYHEXAMETHYLENE AMIDE | | SPECIAL FEATURES | ITEM IS FAA CERTIFIED | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.043 INCHES MINIMUM AND 1.167 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNF |
|
|