5305-01-016-9637 SCREW,CAP,SOCKET HEAD Index 4710-01-016-9639 PIPE,METALLIC

National Stock Number:
5305-01-016-9638

Federal Supply Class:
5305

National Item Identification Number:
010169638

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.


Manufacturer Information:
51B581-4-106725SPS TECHNOLOGIES, LLC
51B581-4-106950HOWMET GLOBAL FASTENING SYSTEMS INC
51B581-4-108524DEUTSCH FASTENER CORP
51B581-4-10JRC1NORTHROP GRUMMAN TECHNICAL SERVICES, INC.
51B581-4-122915NORTHROP GRUMMAN CORP ELECTRONIC SYSTEMS DEFENSIVE SYSTEM DIV
51B581-4-127624SPS TECHNOLOGIES LLC
51B581-4-173197HI-SHEAR CORPORATION
51B581-4-176823NORTHROP GRUMMAN SYSTEMS CORPORATION
51B581-4-180539SPS TECHNOLOGIES, LLC
51B581-4-1L4528LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC


Techincal Specification:
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
FASTENER LENGTH0.362 INCHES MINIMUM AND 0.409 INCHES MAXIMUM
GRIP DIAMETER0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER0.389 INCHES MINIMUM AND 0.394 INCHES MAXIMUM
HEAD STYLEFLAT COUNTERSUNK
INTERNAL DRIVE STYLEOFFSET CRUCIFORM (TORQUE SET)
MATERIALSTEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.290 INCHES MINIMUM AND 0.357 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH28


Click here to Register for Free 30-day Trial