|
|
|
National Stock Number:
5305-01-016-4318
Federal Supply Class:
5305
National Item Identification Number:
010164318
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 10689305-8 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 4119-M07-F09 | 04729 | UNICORP. | | 6143-SS-0832-7 | 06540 | NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV | | 6143-SS-0832-7 | 1YGB8 | CAREY MANUFACTURING CO, INC | | GS553L08CC18A | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FASTENER LENGTH | 1.125 INCHES NOMINAL | | FIRST DIAMETER FROM HEAD | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | HEAD DIAMETER | 0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM | | HEAD HEIGHT | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM | | HEAD STYLE | KNURLED NO. 4 | | INTERNAL DRIVE STYLE | SLOT | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNC | | THREAD QUANTITY PER INCH | 32 |
|
|