|
|
National Stock Number: 5305-01-015-9664
Federal Supply Class: 5305
National Item Identification Number: 010159664
Description: SCREW,MACHINE
Detail: An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
418331-40 | 96214 | RAYTHEON COMPANY | FF-S-92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | MS51959-40B | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
COUNTERSINK ANGLE | 82.0 DEGREES NOMINAL | FASTENER LENGTH | 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM | HEAD DIAMETER | 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM | HEAD HEIGHT | 0.058 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH | NOMINAL THREAD DIAMETER | 0.164 INCHES | NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 2C STYLE | SCREW MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE | SCREW SURFACE TREATMENT | OXIDE | THREAD CLASS | 2A | THREAD DIRECTION | RIGHT-HAND | THREAD LENGTH | 0.025 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | THREAD SERIES DESIGNATOR | UNC | THREAD QUANTITY PER INCH | 32 |
|
|