|
|
National Stock Number: 5305-01-015-8777
Federal Supply Class: 5305
National Item Identification Number: 010158777
Description: SCREW,CLOSE TOLERANCE
Detail: A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
S5008-4-8 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | S5008-4-8 | 17446 | HUCK INTERNATIONAL, INC | S5008-4-8 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | S5008-4-8 | 73197 | HI-SHEAR CORPORATION | S5008-4-8 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION | S5008-4-8 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | S5008-4-8 | 97928 | HUCK INTL INC | S5008-4-8 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | FASTENER LENGTH | 0.939 INCHES MINIMUM AND 0.969 INCHES MAXIMUM | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | GRIP LENGTH | 0.475 INCHES MINIMUM AND 0.495 INCHES MAXIMUM | HEAD DIAMETER | 0.3898 INCHES MINIMUM AND 0.3948 INCHES MAXIMUM | HEAD HEIGHT | 0.015 INCHES MAXIMUM | HEAD STYLE | FILLISTER COUNTERSUNK | INTERNAL DRIVE STYLE | HIGH-TORQUE | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | MATERIAL | STEEL COMP XM-13 OVERALL | NOMINAL THREAD DIAMETER | 0.250 INCHES | SURFACE FINISH | 32.0 MICROINCHES GRIP | SURFACE FINISH | 32.0 MICROINCHES THREADS | THREAD CLASS | 3A | THREAD DIRECTION | RIGHT-HAND | THREAD LENGTH | 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM | THREAD SERIES DESIGNATOR | UNJF | THREAD QUANTITY PER INCH | 28 |
|
|