5305-01-015-6635 SCREW,CAP,SOCKET HEAD Index 5305-01-015-6638 SCREW,CAP,HEXAGON HEAD

National Stock Number:
5305-01-015-6637

Federal Supply Class:
5305

National Item Identification Number:
010156637

Description:
SCREW,CAP,HEXAGON HEAD

Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.


Manufacturer Information:
FF-S-8581348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS51109-17396906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER4.677 INCHES MINIMUM AND 4.791 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH4.906 INCHES MINIMUM AND 5.000 INCHES MAXIMUM
HARDNESS RATING235.0 BRINELL STANDARD MAXIMUM OVERALL
HEAD HEIGHT0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM
HEAD STYLEHEXAGON
MATERIALSTEEL COMP 403 OR STEEL COMP 405 OR STEEL COMP 410 OR STEEL COMP 414 OR STEEL COMP 416 OR STEEL COMP 416SE OR STEEL COMP 420 OR STEEL COMP 430 OR STEEL COMP 431 OR STEEL COMP 440A OR STEEL COMP 440B OR STEEL COMP 440C OR STEEL COMP 446 OR STEEL COMP 430F OVERALL
MINIMUM TENSILE STRENGTH70000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH40000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.750 INCHES
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE
SHANK UNTHREADED HOLE DIAMETER0.138 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS1.100 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
SURFACE FINISH63.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH1.750 INCHES MINIMUM
THREAD SERIES DESIGNATORUNC
THREAD QUANTITY PER INCH10


Click here to Register for Free 30-day Trial