5305-01-015-5690 SCREW,CLOSE TOLERANCE Index 5305-01-015-5693 SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-015-5692

Federal Supply Class:
5305

National Item Identification Number:
010155692

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.


Manufacturer Information:
LK1165-626304TORKON FASTENER CORP
NAS1165-680205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
FASTENER LENGTH0.829 INCHES MINIMUM AND 0.859 INCHES MAXIMUM
GRIP DIAMETER0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER0.577 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLEFLAT COUNTERSUNK
INTERNAL DRIVE STYLEOFFSET CRUCIFORM (TORQUE SET)
LOCKING FEATUREPATCH OR PELLET OR STRIP THREADS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MI-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE FASTENER
MATERIALPLASTIC LOCKING FEATURE
MATERIALSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 FASTENER
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.312 INCHES
SPECIFICATION/STANDARD DATA80205-NAS1165 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENTCADMIUM AND CHROMATE FASTENER
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH24


Click here to Register for Free 30-day Trial