5305-01-015-5224 SCREW,SHOULDER Index 5940-01-015-5226 TERMINAL BOARD

National Stock Number:
5305-01-015-5225

Federal Supply Class:
5305

National Item Identification Number:
010155225

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.


Manufacturer Information:
3991H-4D1456878SPS TECHNOLOGIES, LLC
BM19031-4-14D17446HUCK INTERNATIONAL, INC
BM19031-4-14D97928HUCK INTL INC
HT309-4D1473197HI-SHEAR CORPORATION
HT309-4D14C4293ALCOA FASTENING SYSTEMS FAIRCHILDFASTENERS EUROPE - VSD GMBH
HT309-4D14L4528LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC
HT309-4D14R1120SATAIR A/S
HT8177-4D1492215HOWMET GLOBAL FASTENING SYSTEMS INC
HT8177-4D14C4293ALCOA FASTENING SYSTEMS FAIRCHILDFASTENERS EUROPE - VSD GMBH
ST3M562-4D1476301THE BOEING COMPANY
ST3M562-4D14K5063HARRIS LIFTING AND SHIPPING TACKLE CO LTD


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.031 INCHES MINIMUM AND 1.088 INCHES MAXIMUM FIRST HOLE
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
FASTENER LENGTH1.152 INCHES MINIMUM AND 1.199 INCHES MAXIMUM
GRIP DIAMETER0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
HEAD DIAMETER0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLEFLAT COUNTERSUNK
INTERNAL DRIVE STYLEHIGH-TORQUE
MATERIALSTEEL OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA76301-ST3-562 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMAC PS13145,FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.293 INCHES NOMINAL
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH28


Click here to Register for Free 30-day Trial