|
|
|
National Stock Number:
5305-01-014-4256
Federal Supply Class:
5305
National Item Identification Number:
010144256
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| S5008-3-4 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | S5008-3-4 | 17446 | HUCK INTERNATIONAL, INC | | S5008-3-4 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | S5008-3-4 | 56878 | SPS TECHNOLOGIES, LLC | | S5008-3-4 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | S5008-3-4 | 80539 | SPS TECHNOLOGIES, LLC | | S5008-3-4 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | S5008-3-4 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.628 INCHES MINIMUM AND 0.658 INCHES MAXIMUM | | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM | | GRIP LENGTH | 0.227 INCHES MINIMUM AND 0.247 INCHES MAXIMUM | | HEAD DIAMETER | 0.2966 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM | | HEAD HEIGHT | 0.013 INCHES MAXIMUM | | HEAD STYLE | FILLISTER COUNTERSUNK | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 32 |
|
|