|
|
|
National Stock Number:
5305-01-014-1198
Federal Supply Class:
5305
National Item Identification Number:
010141198
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| HT239-4-11D | 73197 | HI-SHEAR CORPORATION | | HT239-4-11D | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.878 INCHES MINIMUM AND 0.898 INCHES MAXIMUM FIRST HOLE | | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.988 INCHES MINIMUM AND 1.035 INCHES MAXIMUM | | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | GRIP LENGTH | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM | | HEAD DIAMETER | 0.389 INCHES MINIMUM AND 0.394 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | MATERIAL | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 4130 OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE | | SURFACE FINISH | 63.0 MICROINCHES GRIP | | SURFACE FINISH | 63.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD LENGTH | 0.290 INCHES MINIMUM AND 0.357 INCHES MAXIMUM | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 28 |
|
|