5305-01-010-2353, SCREW,CAP,HEXAGON HEAD

National Stock Number:
5305-01-010-2353

Federal Supply Class:
5305

National Item Identification Number:
010102353

Description:
SCREW,CAP,HEXAGON HEAD

Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.

Manufacturer Information:

FF-S-85	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS51099-137	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

FASTENER LENGTH	1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HARDNESS RATING	235.0 BRINELL STANDARD MAXIMUM OVERALL
HEAD HEIGHT	0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM
HEAD STYLE	HEXAGON
HOLE CONFIGURATION STYLE	HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER	0.094 INCHES NOMINAL
HOLE QUANTITY	1
HOLE TYPE	DRILLED
MATERIAL DOCUMENT AND CLASSIFICATION	FED. STD 66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIAL	STEEL COMP 403 OR STEEL COMP 405 OR STEEL COMP 410 OR STEEL COMP 416 OR STEEL COMP 416 PLUS X OR STEEL COMP 416F OR STEEL COMP 416SE OR STEEL COMP 420 OR STEEL COMP 420F OR STEEL COMP 420FSE OR STEEL COMP 429 OR STEEL COMP 430 OR STEEL COMP 430F OR STEEL COMP 430FSE OR STEEL COMP 431 OR STEEL COMP 440A OR STEEL COMP 440B OR STEEL COMP 440C OR STEEL COMP 440F OR STEEL COMP 440FSE OR STEEL COMP 446 OVERALL
MINIMUM TENSILE STRENGTH	70000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH	40000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.625 INCHES
NONDEFINITIVE SPEC/STD DATA	2 TYPE AND 10P STYLE
WIDTH BETWEEN FLATS	0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM
SURFACE FINISH	63.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	1.275 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH	11
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial