|
|
|
National Stock Number:
5305-01-010-2348
Federal Supply Class:
5305
National Item Identification Number:
010102348
Description:
SCREW,CAP,SOCKET HEAD
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter. The head has an internal socket or multiple spline for use with an inserted driver. A locking feature may be incorporated in the design of the head or threads. Excludes items with bevel (conical) heads. See BOLT, INTERNAL WRENCHING. Excludes SCREW, SHOULDER; and SCREW, MACHINE.
|
Manufacturer Information:
| 5305PL0629291 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 946555-5032 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | FF-S-86 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS24671-32 | 0FSS5 | BISCO INDUSTRIES, INC. | | MS24671-32 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS24671-32 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| COUNTERSINK ANGLE | 82.0 DEGREES NOMINAL | | FASTENER LENGTH | 1.210 INCHES MINIMUM AND 1.250 INCHES MAXIMUM | | HARDNESS RATING | 80.0 ROCKWELL B MINIMUM OVERALL | | HEAD DIAMETER | 0.480 INCHES MINIMUM AND 0.531 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | HEXAGON | | MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OVERALL | | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH | | MINIMUM YIELD STRENGTH | 30000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | NONDEFINITIVE SPEC/STD DATA | 4 TYPE | | WIDTH ACROSS FLATS | 0.156 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.110 INCHES MINIMUM AND 1.250 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 20 | | THREAD SERIES DESIGNATOR | UNC |
|
|