5305-01-008-5404, SCREW,SHOULDER

National Stock Number:
5305-01-008-5404

Federal Supply Class:
5305

National Item Identification Number:
010085404

Description:
SCREW,SHOULDER

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 IN.) (1.5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is designed to be driven with either a wrench or an inserted driver or both in sizes below No. 10 (0.190 IN.) (5 mm) nominal diameter. No. 10 (0.190 IN.) (5 mm) and larger sizes must be designed for any type of inserted driver, but may also provide for external wrenching of the head. A locking feature may be incorporated in the design of the head or threads. For items which are both shouldered and have an externally relieved body, use SCREW, EXTERNALLY RELIEVED BODY. For items with a No. 10 (0.190 IN.) (5 mm) or larger thread diameter without an inserted driver head, use BOLT, SHOULDER. Excludes BOLT, INTERNAL WRENCHING and SCREW, CAP, SOCKET HEAD.

Manufacturer Information:

AS204	84256	AVIBANK MFG., INC.
CA27031-1700	29372	HOWMET GLOBAL FASTENING SYSTEMS INC.
GB511CJ1700	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	2.490 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH	2.670 INCHES MINIMUM AND 2.706 INCHES MAXIMUM
HARDNESS RATING	39.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER	0.990 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HEAD HEIGHT	0.312 INCHES NOMINAL
HEAD STYLE	ROUND W/WRENCH FLATS
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP XM-13 OVERALL
MINIMUM TENSILE STRENGTH	180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.625 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER	0.749 INCHES NOMINAL FIRST SHOULDER
SHOULDER SHAPE	ROUND FIRST SHOULDER
SHOULDER LENGTH	2.120 INCHES MINIMUM AND 2.146 INCHES MAXIMUM FIRST SHOULDER
SPECIAL FEATURES	RETAINING ELEMENT IN SHANK
WIDTH BETWEEN FLATS	0.880 INCHES MINIMUM AND 0.888 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.555 INCHES NOMINAL
THREAD QUANTITY PER INCH	18
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial