|
|
|
National Stock Number:
5305-01-006-9467
Federal Supply Class:
5305
National Item Identification Number:
010069467
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 53B335-9 | 06725 | SPS TECHNOLOGIES, LLC | | 53B335-9 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | 53B335-9 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 53B335-9 | 17446 | HUCK INTERNATIONAL, INC | | 53B335-9 | 27624 | SPS TECHNOLOGIES LLC | | 53B335-9 | 73197 | HI-SHEAR CORPORATION | | 53B335-9 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 53B335-9 | 79U29 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 53B335-9 | 80539 | SPS TECHNOLOGIES, LLC | | 53B335-9 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | 53B335-9 | 97928 | HUCK INTL INC | | 53B335-9 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 1.118 INCHES MINIMUM AND 1.164 INCHES MAXIMUM | | GRIP LENGTH | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM | | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM | | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL | | HEAD DIAMETER | 0.578 INCHES MINIMUM AND 0.635 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL | | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.546 INCHES MINIMUM AND 0.612 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNJF |
|
|