| CRITICALITY CODE JUSTIFICATION | FEAT |
| FASTENER LENGTH | 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| HARDNESS RATING | 80.0 ROCKWELL B MINIMUM OVERALL |
| HEAD DIAMETER | 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| HEAD HEIGHT | 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| HOLE CONFIGURATION STYLE | ROUND INTERNAL HEXAGON |
| HOLE DIAMETER | 0.028 INCHES NOMINAL |
| HOLE QUANTITY | 6 |
| HOLE TYPE | DRILLED |
| INTERNAL DRIVE STYLE | HEXAGON |
| MATERIAL | STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OR STEEL COMP XM-7 OVERALL |
| MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| MINIMUM YIELD STRENGTH | 30000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.138 INCHES |
| SPECIAL FEATURES | THIS PART MEETS THE Y REQUIREMENTS DUE TO CRITICAL FEATURES, TOLERANCE, FIT RESTRICTIONS, MATERIAL PROPERTIES AND MANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO WEAPON SYSTEM, DEATH OR SERIOUS INJURY |
| WIDTH ACROSS FLATS | 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.268 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNC |