5305-01-004-1967, SCREW,EXTERNALLY RELIEVED BODY

4810-01-004-1966 VALVE,LINEAR,DIRECTIONAL CONTROL

5306-01-004-1968 BOLT,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-004-1967

Federal Supply Class:
5305

National Item Identification Number:
010041967

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

ST5H082-1

22915

NORTHROP GRUMMAN CORP ELECTRONIC SYSTEMS DEFENSIVE SYSTEM DIV

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER	5.211 INCHES MINIMUM AND 5.235 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	0.352 INCHES MINIMUM AND 0.369 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	3
FASTENER LENGTH	6.200 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.184 INCHES MINIMUM AND 0.192 INCHES MAXIMUM
HEAD DIAMETER	0.500 INCHES NOMINAL
HEAD HEIGHT	0.375 INCHES NOMINAL
HEAD STYLE	FLAT CHAMFER
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 316 OVERALL
NOMINAL THREAD DIAMETER	0.190 INCHES
SECOND DIAMETER FROM HEAD	0.147 INCHES MINIMUM AND 0.149 INCHES MAXIMUM
SPECIAL FEATURES	KNURLED HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35,TY 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THIRD DIAMETER FROM HEAD	0.184 INCHES MINIMUM AND 0.192 INCHES MAXIMUM
THREAD LENGTH	0.620 INCHES NOMINAL
THREAD QUANTITY PER INCH	24
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial