|
|
National Stock Number: 5305-00-997-4135
Federal Supply Class: 5305
National Item Identification Number: 009974135
Description: SCREW,MACHINE
Detail: An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
MS51959-117 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
COUNTERSINK ANGLE | 82.0 DEGREES NOMINAL | FASTENER LENGTH | 2.500 INCHES MAXIMUM | HEAD DIAMETER | 0.722 INCHES MINIMUM AND 0.762 INCHES MAXIMUM | HEAD STYLE | FLAT COUNTERSUNK | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | NOMINAL THREAD DIAMETER | 0.375 INCHES | NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 2C STYLE | SCREW MATERIAL | STEEL COMP 304 | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE | SCREW SURFACE TREATMENT | PASSIVATE | TEST DATA DOCUMENT | 81348-FFS92 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 96906-MS51959-117 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | THREAD CLASS | 2A | THREAD DIRECTION | RIGHT-HAND | THREAD LENGTH | 1.750 INCHES MAXIMUM | THREAD SERIES DESIGNATOR | UNC | THREAD QUANTITY PER INCH | 16 |
|
|