4820-00-993-8604 COCK,PLUG Index 8010-00-993-8609 THINNER,PAINT PRODUCTS

National Stock Number:
5305-00-993-8607

Federal Supply Class:
5305

National Item Identification Number:
009938607

Description:
SCREW,SHOULDER

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 IN.) (1.5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is designed to be driven with either a wrench or an inserted driver or both in sizes below No. 10 (0.190 IN.) (5 mm) nominal diameter. No. 10 (0.190 IN.) (5 mm) and larger sizes must be designed for any type of inserted driver, but may also provide for external wrenching of the head. A locking feature may be incorporated in the design of the head or threads. For items which are both shouldered and have an externally relieved body, use SCREW, EXTERNALLY RELIEVED BODY. For items with a No. 10 (0.190 IN.) (5 mm) or larger thread diameter without an inserted driver head, use BOLT, SHOULDER. Excludes BOLT, INTERNAL WRENCHING and SCREW, CAP, SOCKET HEAD.


Manufacturer Information:
MS51975-5380205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS51975-5396906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
FASTENER LENGTH2.335 INCHES MINIMUM AND 2.385 INCHES MAXIMUM
HARDNESS RATING32.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER0.977 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HEAD STYLEFLAT CHAMFER
INTERNAL DRIVE STYLEHEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.625 INCHES
SHOULDER LENGTH1.397 INCHES MINIMUM AND 1.417 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPEROUND FIRST SHOULDER
SHOULDER DIAMETER0.746 INCHES MINIMUM AND 0.748 INCHES MAXIMUM FIRST SHOULDER
WIDTH ACROSS FLATS0.375 INCHES NOMINAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNC
THREAD QUANTITY PER INCH11


Click here to Register for Free 30-day Trial