| DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY CONDITION A |
| DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL |
| FASTENER LENGTH | 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD DIAMETER | 0.303 INCHES MINIMUM AND 0.313 INCHES MAXIMUM |
| HEAD HEIGHT | 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| INTERNAL DRIVE STYLE | HEXAGON |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 304 OVERALL |
| MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| MINIMUM YIELD STRENGTH | 30000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.190 INCHES |
| NONDEFINITIVE SPEC/STD DATA | 6 TYPE |
| WIDTH ACROSS FLATS | 0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEST DATA DOCUMENT | 81348-FFS86 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 96906-MS16995-35 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.262 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES DESIGNATOR | UNC |