|
|
|
National Stock Number:
5305-00-992-5942
Federal Supply Class:
5305
National Item Identification Number:
009925942
Description:
SCREW,CAP,SOCKET HEAD
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter. The head has an internal socket or multiple spline for use with an inserted driver. A locking feature may be incorporated in the design of the head or threads. Excludes items with bevel (conical) heads. See BOLT, INTERNAL WRENCHING. Excludes SCREW, SHOULDER; and SCREW, MACHINE.
|
Manufacturer Information:
| MS16996-11 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY CONDITION A | | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL | | FASTENER LENGTH | 0.625 INCHES MAXIMUM | | HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL | | HEAD DIAMETER | 0.303 INCHES MINIMUM AND 0.313 INCHES MAXIMUM | | HEAD HEIGHT | 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | INTERNAL DRIVE STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 304 OVERALL | | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH | | MINIMUM YIELD STRENGTH | 30000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | NONDEFINITIVE SPEC/STD DATA | 6 TYPE | | WIDTH ACROSS FLATS | 0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM | | SURFACE TREATMENT | PASSIVATE OVERALL | | TEST DATA DOCUMENT | 81348-FFS86 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 96906-MS16996-11 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.625 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNF |
|
|