| DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY CONDITION A |
| DEPARTURE FROM CITED DOCUMENT | AS MODIFED BY MATERIAL |
| FASTENER LENGTH | 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD DIAMETER | 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| HEAD HEIGHT | 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| INTERNAL DRIVE STYLE | HEXAGON |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 304 OVERALL |
| MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| MINIMUM YIELD STRENGTH | 30000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.164 INCHES |
| NONDEFINITIVE SPEC/STD DATA | 6 TYPE |
| WIDTH ACROSS FLATS | 0.141 INCHES MINIMUM AND 0.143 INCHES MAXIMUM |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEST DATA DOCUMENT | 81348-FFS86 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). OR 96906-MS16995-28 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.658 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNC |