DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY CONDITION A |
DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL |
FASTENER LENGTH | 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
HEAD DIAMETER | 0.176 INCHES MINIMUM AND 0.183 INCHES MAXIMUM |
HEAD HEIGHT | 0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM |
HEAD STYLE | FLAT CHAMFER |
INTERNAL DRIVE STYLE | HEXAGON |
MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
MATERIAL | STEEL COMP 384 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP XM-7 OVERALL |
MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
MINIMUM YIELD STRENGTH | 30000 POUNDS PER SQUARE INCH |
NOMINAL THREAD DIAMETER | 0.112 INCHES |
NONDEFINITIVE SPEC/STD DATA | 6 TYPE |
WIDTH ACROSS FLATS | 0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
SURFACE TREATMENT | PASSIVATE OVERALL |
TEST DATA DOCUMENT | 81348-FFS86 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). OR 96906-MS16995-10 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
THREAD CLASS | 3A |
THREAD DIRECTION | RIGHT-HAND |
THREAD LENGTH | 0.295 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
THREAD QUANTITY PER INCH | 40 |
THREAD SERIES DESIGNATOR | UNC |