|
|
|
National Stock Number:
5305-00-992-5784
Federal Supply Class:
5305
National Item Identification Number:
009925784
Description:
SCREW,CAP,SOCKET HEAD
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter. The head has an internal socket or multiple spline for use with an inserted driver. A locking feature may be incorporated in the design of the head or threads. Excludes items with bevel (conical) heads. See BOLT, INTERNAL WRENCHING. Excludes SCREW, SHOULDER; and SCREW, MACHINE.
|
Manufacturer Information:
| MS16995-2 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY CONDITION A | | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL | | FASTENER LENGTH | 0.250 INCHES MAXIMUM | | HARDNESS RATING | 80.0 ROCKWELL B MINIMUM OVERALL | | HEAD DIAMETER | 0.134 INCHES MINIMUM AND 0.140 INCHES MAXIMUM | | HEAD HEIGHT | 0.083 INCHES MINIMUM AND 0.086 INCHES MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | INTERNAL DRIVE STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 304 OVERALL | | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH | | MINIMUM YIELD STRENGTH | 30000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.086 INCHES | | NONDEFINITIVE SPEC/STD DATA | 6 TYPE | | WIDTH ACROSS FLATS | 0.078 INCHES MINIMUM AND 0.079 INCHES MAXIMUM | | SURFACE TREATMENT | PASSIVATE OVERALL | | TEST DATA DOCUMENT | 81348-FFS86 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 96906-MS16995-2 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.250 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 56 | | THREAD SERIES DESIGNATOR | UNC |
|
|