5305-00-935-2931, SCREW,CAP,HEXAGON HEAD

National Stock Number:
5305-00-935-2931

Federal Supply Class:
5305

National Item Identification Number:
009352931

Description:
SCREW,CAP,HEXAGON HEAD

Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.

Manufacturer Information:

5305009352931	SCY13	E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
AES01FA00C50AW9A91	05047	THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
ASME B18.2.1	05047	THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
ASME B18.2.1A	80204	AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED
B1821BH100F350N	80204	AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED
FF-S-85	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS90726-236	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS90727-236	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

FASTENER LENGTH	3.312 INCHES MINIMUM AND 3.500 INCHES MAXIMUM
HARDNESS RATING	32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.591 INCHES MINIMUM AND 0.627 INCHES MAXIMUM
HEAD STYLE	HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	SAE J429 GR8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL OVERALL
MINIMUM TENSILE STRENGTH	150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	1.000 INCHES
NONDEFINITIVE SPEC/STD DATA	2 TYPE AND Y10P STYLE AND 8 GRADE
WIDTH BETWEEN FLATS	1.469 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	ZINC AND CHROMATE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	2.250 INCHES MINIMUM AND 2.438 INCHES MAXIMUM
THREAD QUANTITY PER INCH	12
THREAD SERIES DESIGNATOR	UNF

Click here to Register for Free 30-day Trial