5910-00-810-1265 CAPACITOR,FIXED,CERAMIC DIELECTR Index 5305-00-810-1267 SCREW,MACHINE

National Stock Number:
5305-00-810-1266

Federal Supply Class:
5305

National Item Identification Number:
008101266

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.


Manufacturer Information:
51B334-40H06725SPS TECHNOLOGIES, LLC
51B334-40H06954BERCO MFG CO
51B334-40H0JRC1NORTHROP GRUMMAN TECHNICAL SERVICES, INC.
51B334-40H27624SPS TECHNOLOGIES LLC
51B334-40H56878SPS TECHNOLOGIES, LLC
51B334-40H73197HI-SHEAR CORPORATION
51B334-40H76823NORTHROP GRUMMAN SYSTEMS CORPORATION
51B334-40H92215HOWMET GLOBAL FASTENING SYSTEMS INC
51B334-40HL4528LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER0.116 INCHES NOMINAL FIRST HOLE
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
FASTENER LENGTH2.770 INCHES MINIMUM AND 2.837 INCHES MAXIMUM
GRIP DIAMETER0.2482 INCHES MINIMUM AND 0.2487 INCHES MAXIMUM
GRIP LENGTH2.470 INCHES MINIMUM AND 2.490 INCHES MAXIMUM
HEAD DIAMETER0.507 INCHES NOMINAL
HEAD STYLEFLAT COUNTERSUNK
INTERNAL DRIVE STYLEOFFSET CRUCIFORM (TORQUE SET)
MATERIALSTEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 6150 OR STEEL COMP E4340 OVERALL
MINIMUM TENSILE STRENGTH180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES NOMINAL FIRST HOLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 1 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-416 TY 2 FED SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OR CADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.316 INCHES MINIMUM
THREAD SERIES DESIGNATORUNF
THREAD QUANTITY PER INCH28


Click here to Register for Free 30-day Trial