5905-00-809-0098 RESISTOR,VARIABLE,WIRE WOUND,NON Index 4720-00-809-0101 HOSE ASSEMBLY,METALLIC

National Stock Number:
5305-00-809-0100

Federal Supply Class:
5305

National Item Identification Number:
008090100

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.


Manufacturer Information:
NAS1208-65D04348LAWRENCE ENGINEERING AND SUPPLY INC
NAS1208-65D07851NOR-CAL SUPPLY CO
NAS1208-65D08938AIR INDUSTRIES CO INC
NAS1208-65D30889ERIKS SOUTHWEST INC DBA MONTCLAIR ENTERPRISES
NAS1208-65D50568APCOM INC
NAS1208-65D56878SPS TECHNOLOGIES, LLC
NAS1208-65D71563COLLINS ENGINEERING CORP
NAS1208-65D73197HI-SHEAR CORPORATION
NAS1208-65D80205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NAS1208-65D80539SPS TECHNOLOGIES, LLC
NAS1208-65D82172DURHAM AIRCRAFT SERVICE INC


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER4.367 INCHES MINIMUM AND 4.417 INCHES MAXIMUM FIRST HOLE
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH4.500 INCHES MINIMUM AND 4.530 INCHES MAXIMUM
GRIP DIAMETER0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH4.052 INCHES MINIMUM AND 4.072 INCHES MAXIMUM
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER0.959 INCHES MINIMUM AND 1.017 INCHES MAXIMUM
HEAD STYLEFLAT COUNTERSUNK
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.500 INCHES
SHANK UNTHREADED HOLE DIAMETER0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA80205-NAS1208 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.428 INCHES MINIMUM AND 0.478 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNF
THREAD QUANTITY PER INCH20


Click here to Register for Free 30-day Trial