5305-00-808-7832 SCREW,MACHINE Index 6150-00-808-7841 BUS,CONDUCTOR

National Stock Number:
5305-00-808-7834

Federal Supply Class:
5305

National Item Identification Number:
008087834

Description:
SCREW,MACHINE

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.


Manufacturer Information:
5305PL07238619009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
MS24693-696906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS24693-S60NFB8DIALOGIC CORP
MS24693-S680205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS24693-S696906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
S88066-440-870210HONEYWELL INTERNATIONAL INC.


Techincal Specification:
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH0.500 INCHES NOMINAL
HEAD DIAMETER0.191 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLEFLAT COUNTERSUNK
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.112 INCHES
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-630 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-631 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE
SCREW MATERIALSTEEL COMP 1010
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-B-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.450 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNC
THREAD QUANTITY PER INCH40


Click here to Register for Free 30-day Trial