| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.456 INCHES MINIMUM AND 1.503 INCHES MAXIMUM FIRST HOLE |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| FASTENER LENGTH | 1.573 INCHES MINIMUM AND 1.620 INCHES MAXIMUM |
| GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| GRIP LENGTH | 1.298 INCHES MINIMUM AND 1.328 INCHES MAXIMUM |
| HEAD DIAMETER | 0.361 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
| HEAD HEIGHT | 0.103 INCHES MINIMUM AND 0.118 INCHES MAXIMUM |
| HEAD STYLE | MODIFIED PAN |
| INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL |
| MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.190 INCHES |
| SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES NOMINAL FIRST HOLE |
| SPECIAL FEATURES | CRITICAL SAFETY ITEM; PER DSCR-MA-21-15267 ALL SOURCES OF SUPPLY MUST BE APPROVED BY ESA |
| SURFACE FINISH | 32.0 MICROINCHES GRIP |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.276 INCHES MINIMUM |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNC |