|
|
|
National Stock Number:
5305-00-795-1926
Federal Supply Class:
5305
National Item Identification Number:
007951926
Description:
THUMBSCREW
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter. It may have an unthreaded portion with a diameter less than, equal to, or greater than the diameter of the threaded portion. It has either a vertically flattened, circular knurled, or wing type head, all of which are designed for rotation by the thumb and fingers. For items having wrenching facilities such as socket recess, multiple spline or slot heads, use SCREW (as modified) or BOLT (as modified).
|
Manufacturer Information:
| 46177-3 | 24930 | L3HARRIS TECHNOLOGIES, INC |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.188 INCHES NOMINAL | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | 1.125 INCHES NOMINAL | | FASTENER LENGTH | 2.063 INCHES NOMINAL | | FIRST DIAMETER FROM HEAD | 1.000 INCHES NOMINAL | | HEAD HEIGHT | 0.437 INCHES NOMINAL | | HEAD DIAMETER | 1.500 INCHES NOMINAL | | HEAD STYLE | KNURLED NO. 1 | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | POINT CHAMFER ANGLE | 60.0 DEGREES NOMINAL | | POINT LENGTH | 0.125 INCHES NOMINAL | | POINT STYLE | CONE | | SECOND DIAMETER FROM HEAD | 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM | | SPECIAL FEATURES | DRILLED AND TAPPED HOLE NO. 6-32 THRU HEAD AND SHOULDER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 44286,FSCM 24930 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | OXIDE OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.625 INCHES MINIMUM | | THREAD SERIES DESIGNATOR | UNC | | THREAD QUANTITY PER INCH | 20 |
|
|