5935-00-689-7332 SOCKET,PLUG-IN ELECTRONIC COMPON Index 5935-00-689-7334 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5305-00-689-7333

Federal Supply Class:
5305

National Item Identification Number:
006897333

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.


Manufacturer Information:
7S37-4-743999THE BOEING COMPANY


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER0.632 INCHES MINIMUM AND 0.642 INCHES MAXIMUM FIRST HOLE
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH0.738 INCHES MINIMUM AND 0.768 INCHES MAXIMUM
GRIP DIAMETER0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
HEAD DIAMETER0.362 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
HEAD STYLEFLAT COUNTERSUNK
INTERNAL DRIVE STYLEOFFSET CRUCIFORM (TORQUE SET)
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 4130 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
THREAD LENGTH0.290 INCHES MINIMUM AND 0.340 INCHES MAXIMUM
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH28


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us