5305-00-685-1805, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-00-685-1805

Federal Supply Class:
5305

National Item Identification Number:
006851805

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

543-2922-002	13499	ROCKWELL COLLINS, INC.
543-2922-002	95105	ROCKWELL COLLINS, INC.

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIFTH DIAMETER	4.078 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	3.250 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER	4.000 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	3.281 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER	3.938 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	5
FASTENER LENGTH	4.438 INCHES NOMINAL
FIFTH DIAMETER FROM HEAD	0.163 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.163 INCHES NOMINAL
FOURTH DIAMETER FROM HEAD	0.223 INCHES NOMINAL
HEAD DIAMETER	0.274 INCHES NOMINAL
HEAD HEIGHT	0.133 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
HEAD STYLE	FILLISTER COUNTERSUNK
INTERNAL DRIVE STYLE	CROSS RECESS TYPE II
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 303 OVERALL
NOMINAL THREAD DIAMETER	0.164 INCHES
SECOND DIAMETER FROM HEAD	0.116 INCHES NOMINAL
SURFACE TREATMENT	PASSIVATE OVERALL
THIRD DIAMETER FROM HEAD	0.163 INCHES NOMINAL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.358 INCHES MINIMUM
THREAD SERIES DESIGNATOR	UNC
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial