|
|
|
National Stock Number:
5305-00-655-6541
Federal Supply Class:
5305
National Item Identification Number:
006556541
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
|
|
Techincal Specification:
| COUNTERSINK ANGLE | 0.308 DEGREES MINIMUM AND 0.332 DEGREES MAXIMUM | | FASTENER LENGTH | 0.359 INCHES MINIMUM AND 0.406 INCHES MAXIMUM | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM | | HEAD DIAMETER | 0.308 INCHES MINIMUM AND 0.332 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | TORQUE SET | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8695 MIL SPEC SINGLE MATERIAL RESPONSE | | SCREW MATERIAL | STEEL | | SCREW SURFACE TREATMENT | CADMIUM | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.285 INCHES MINIMUM | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNC |
|
|