5305-00-649-6994, SCREW,EXTERNALLY RELIEVED BODY

5305-00-649-6993 SCREW,EXTERNALLY RELIEVED BODY

5305-00-649-6995 SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-00-649-6994

Federal Supply Class:
5305

National Item Identification Number:
006496994

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

9084859

18876

U S ARMY AVIATION AND MISSILE COMMAND

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.031 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	0.046 INCHES MINIMUM AND 0.051 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER	0.078 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	3
FIRST DIAMETER FROM HEAD	0.203 INCHES MINIMUM AND 0.221 INCHES MAXIMUM
HEAD HEIGHT	0.094 INCHES NOMINAL
HEAD DIAMETER	0.312 INCHES NOMINAL
HEAD STYLE	FLAT CHAMFER
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 303 OVERALL
NOMINAL THREAD DIAMETER	0.138 INCHES
SECOND DIAMETER FROM HEAD	0.215 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-STD-171 FINISH NO. 5 4,1 MIL STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THIRD DIAMETER FROM HEAD	0.099 INCHES NOMINAL
THREAD LENGTH	0.172 INCHES MINIMUM
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial