|
|
|
National Stock Number:
5305-00-647-3395
Federal Supply Class:
5305
National Item Identification Number:
006473395
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 9071964 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.750 INCHES NOMINAL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FASTENER LENGTH | 1.250 INCHES NOMINAL | | FIRST DIAMETER FROM HEAD | 0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM | | HEAD DIAMETER | 0.500 INCHES NOMINAL | | HEAD HEIGHT | 0.562 INCHES NOMINAL | | HEAD STYLE | KNURLED NO. 1 | | INTERNAL DRIVE STYLE | SLOT | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SPECIAL FEATURES | CONE POINT | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.312 INCHES MINIMUM | | THREAD SERIES DESIGNATOR | UNC | | THREAD QUANTITY PER INCH | 20 |
|
|