5305-00-536-9865, SCREW,EXTERNALLY RELIEVED BODY

5305-00-536-9867 SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-00-536-9865

Federal Supply Class:
5305

National Item Identification Number:
005369865

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

238446-001

81413

BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	0.220 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	2
FASTENER LENGTH	0.425 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.138 INCHES NOMINAL
HEAD DIAMETER	0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIAL	STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MINIMUM TENSILE STRENGTH	80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.138 INCHES
SECOND DIAMETER FROM HEAD	0.100 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.190 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial