5305-00-530-6174, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-00-530-6174

Federal Supply Class:
5305

National Item Identification Number:
005306174

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

53G970852-5	30205	MERCER PRODUCTS & MANUFACTURING COMPANY
53G970852-5	76301	THE BOEING COMPANY

Techincal Specification:

FASTENER LENGTH	1.430 INCHES MINIMUM AND 1.450 INCHES MAXIMUM
GRIP DIAMETER	0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH	0.770 INCHES MINIMUM AND 0.790 INCHES MAXIMUM
HEAD DIAMETER	0.5565 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM
HEAD HEIGHT	0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD STYLE	FLAT CHAMFER
INTERNAL DRIVE STYLE	HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000,COND C MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP E4340 OVERALL
MINIMUM TENSILE STRENGTH	180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.437 INCHES
WIDTH ACROSS FLATS	0.3125 INCHES MINIMUM AND 0.3160 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES TOP OF HEAD
SURFACE FINISH	63.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	PS13101,TYPE 2 CLASS 3,FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.640 INCHES MINIMUM AND 0.680 INCHES MAXIMUM
THREAD QUANTITY PER INCH	20
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial