|
|
|
National Stock Number:
5305-00-162-4816
Federal Supply Class:
5305
National Item Identification Number:
001624816
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 51B333-15S | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 51B333-15S | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 1.198 INCHES MINIMUM AND 1.245 INCHES MAXIMUM | | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM | | GRIP LENGTH | 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM | | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL | | HEAD DIAMETER | 0.377 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8844 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL | | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE TREATMENT | TIN OVERALL | | THREAD LENGTH | 0.250 INCHES MINIMUM AND 0.317 INCHES MAXIMUM | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNC | | THREAD QUANTITY PER INCH | 32 |
|
|