5305-00-161-0698, SCREW,CAP,HEXAGON HEAD

National Stock Number:
5305-00-161-0698

Federal Supply Class:
5305

National Item Identification Number:
001610698

Description:
SCREW,CAP,HEXAGON HEAD

Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.

Manufacturer Information:

FFS85	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS51105-464	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
NP1086-62	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	2.531 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH	2.562 INCHES MINIMUM AND 2.750 INCHES MAXIMUM
HARDNESS RATING	25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM
HEAD STYLE	HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL OVERALL
MINIMUM TENSILE STRENGTH	120000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.750 INCHES
NONDEFINITIVE SPEC/STD DATA	2 TYPE OR 10P STYLE OR 5 GRADE
SHANK UNTHREADED HOLE DIAMETER	0.140 INCHES NOMINAL FIRST HOLE
WIDTH BETWEEN FLATS	1.100 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
SURFACE FINISH	63.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	1.750 INCHES MINIMUM
THREAD SERIES DESIGNATOR	UNC
THREAD QUANTITY PER INCH	10

Click here to Register for Free 30-day Trial