5305-00-151-6154, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-00-151-6154

Federal Supply Class:
5305

National Item Identification Number:
001516154

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

6179-SS-0832-7	06540	NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV
6179-SS-0832-7	1YGB8	CAREY MANUFACTURING CO, INC
6179SS0832	06540	NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV
6179SS0832	1YGB8	CAREY MANUFACTURING CO, INC
62990201	01121	ROCKWELL AUTOMATION, INC.

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD DIAMETER	0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM
HEAD HEIGHT	0.244 INCHES MINIMUM AND 0.255 INCHES MAXIMUM
HEAD STYLE	KNURLED NO. 2
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 303 OVERALL
NOMINAL THREAD DIAMETER	0.164 INCHES
SPECIAL FEATURES	NONSTANDARD POINT NO. 6 WITH A NOM DIA OF 0.112 IN. NOM LG OF 0.125 IN. ANGLE OF POINT 60 DEGREES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial