|
|
|
National Stock Number:
5305-00-151-0755
Federal Supply Class:
5305
National Item Identification Number:
001510755
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| 1176-3-4 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 | | AN510-3R4 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | FFS92ANDTYPE3ANDSTYLE2C | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | P342-9002-00 | 77250 | ALLIED PRODUCTS CORP PHEOLL MFG CO DIV | | P342-9002-000 | 77250 | ALLIED PRODUCTS CORP PHEOLL MFG CO DIV |
|
Techincal Specification:
| COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | HEAD DIAMETER | 0.175 INCHES MINIMUM AND 0.199 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MINIMUM TENSILE STRENGTH | 55000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.099 INCHES | | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE | | SCREW SURFACE TREATMENT | CADMIUM | | SCREW MATERIAL | STEEL OR STEEL COMP 1010 | | THREAD LENGTH | 0.214 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 56 | | THREAD SERIES DESIGNATOR | UNF |
|
|