|
|
|
National Stock Number:
5305-00-151-0376
Federal Supply Class:
5305
National Item Identification Number:
001510376
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| 10125005 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | AN500A8-28 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | FFS92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS35265-52 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| FASTENER LENGTH | 1.750 INCHES NOMINAL | | HEAD DIAMETER | 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM | | HEAD HOLE CONFIGURATION STYLE | ROUND | | HEAD HEIGHT | 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM | | HEAD STYLE | FILLISTER | | HOLE DIAMETER | 0.046 INCHES NOMINAL | | HOLE QUANTITY | 1 | | INTERNAL DRIVE STYLE | SLOT | | MINIMUM TENSILE STRENGTH | 55000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | SCREW MATERIAL | STEEL | | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES | | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNC |
|
|