|
|
|
National Stock Number:
5305-00-150-3242
Federal Supply Class:
5305
National Item Identification Number:
001503242
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 106334-8-23D | 56878 | SPS TECHNOLOGIES, LLC | | 106334-8-23D | 80539 | SPS TECHNOLOGIES, LLC | | 202-15522-8A23 | 06725 | SPS TECHNOLOGIES, LLC | | 202-15522-8A23 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | 202-15522-8A23 | 56878 | SPS TECHNOLOGIES, LLC | | 202-15522-8A23 | 80378 | TRIUMPH AEROSTRUCTURES, LLC | | 202-15522-8A23 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | AIC83-8A23 | 06725 | SPS TECHNOLOGIES, LLC | | BA45132-3A23 | 17446 | HUCK INTERNATIONAL, INC | | BA45132-3A23 | 97928 | HUCK INTL INC | | VT1631-8-23T | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.735 INCHES MINIMUM AND 1.814 INCHES MAXIMUM FIRST HOLE | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 1.874 INCHES MINIMUM AND 1.921 INCHES MAXIMUM | | GRIP LENGTH | 1.427 INCHES MINIMUM AND 1.447 INCHES MAXIMUM | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HEAD DIAMETER | 0.720 INCHES MINIMUM AND 0.754 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP H11 OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.500 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.427 INCHES MINIMUM AND 0.494 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 20 | | THREAD SERIES DESIGNATOR | UNJF |
|
|