5305-00-145-6379, SCREW,CAP,HEXAGON HEAD

National Stock Number:
5305-00-145-6379

Federal Supply Class:
5305

National Item Identification Number:
001456379

Description:
SCREW,CAP,HEXAGON HEAD

Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.

Manufacturer Information:

FF-S-85C TY II ST 10P	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
FFS85	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS51096-421	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

FASTENER LENGTH	3.156 INCHES MINIMUM AND 3.250 INCHES MAXIMUM
HARDNESS RATING	25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
HEAD STYLE	HEXAGON
HOLE CONFIGURATION STYLE	HEXAGON FLATS
HOLE DIAMETER	0.092 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
HOLE TYPE	DRILLED
HOLE QUANTITY	1
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIAL	STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1536 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1541 OVERALL
MINIMUM TENSILE STRENGTH	120000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.500 INCHES
NONDEFINITIVE SPEC/STD DATA	2 TYPE AND 10P STYLE AND 5 GRADE
WIDTH BETWEEN FLATS	0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
SURFACE FINISH	63.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	1.250 INCHES MINIMUM AND 1.438 INCHES MAXIMUM
THREAD QUANTITY PER INCH	20
THREAD SERIES DESIGNATOR	UNF

Click here to Register for Free 30-day Trial