|
|
National Stock Number: 5305-00-145-2113
Federal Supply Class: 5305
National Item Identification Number: 001452113
Description: SCREW,CLOSE TOLERANCE
Detail: A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
C079-4-24 | 56878 | SPS TECHNOLOGIES, LLC | C079-4-24 | 81755 | LOCKHEED MARTIN CORPORATION | C079-4-24 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | SFT930-4-24 | 56878 | SPS TECHNOLOGIES, LLC | VS2787T4C24 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | FASTENER LENGTH | 1.777 INCHES MINIMUM AND 1.824 INCHES MAXIMUM | GRIP DIAMETER | 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM | GRIP LENGTH | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM | HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND 58.0 ROCKWELL C MAXIMUM OVERALL | HEAD DIAMETER | 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM | HEAD STYLE | FLAT COUNTERSUNK | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | MATERIAL DOCUMENT AND CLASSIFICATION | VASC0 JET M-A FSCM 95402 MFR REF SINGLE MATERIAL RESPONSE OVERALL | MATERIAL | VANADIUM OVERALL | MINIMUM TENSILE STRENGTH | 300000 POUNDS PER SQUARE INCH | NOMINAL THREAD DIAMETER | 0.250 INCHES | SURFACE FINISH | 32.0 MICROINCHES GRIP | SURFACE FINISH | 32.0 MICROINCHES THREADS | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | SURFACE TREATMENT | CADMIUM OVERALL | THREAD LENGTH | 0.267 INCHES MINIMUM AND 0.334 INCHES MAXIMUM | THREAD CLASS | 3A | THREAD DIRECTION | RIGHT-HAND | THREAD SERIES DESIGNATOR | UNJF | THREAD QUANTITY PER INCH | 28 |
|
|