|
|
National Stock Number: 5305-00-144-9547
Federal Supply Class: 5305
National Item Identification Number: 001449547
Description: SCREW,CLOSE TOLERANCE
Detail: A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
10275648 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
FASTENER LENGTH | 0.280 INCHES NOMINAL | GRIP DIAMETER | 0.0933 INCHES MINIMUM AND 0.0935 INCHES MAXIMUM | GRIP LENGTH | 0.115 INCHES NOMINAL | HEAD DIAMETER | 0.190 INCHES NOMINAL | HEAD HEIGHT | 0.060 INCHES NOMINAL | HEAD STYLE | FLAT CHAMFER | INTERNAL DRIVE STYLE | SLOT | LOCKING FEATURE | STRIP THREADS | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | MATERIAL | STEEL COMP 303 OVERALL | NOMINAL THREAD DIAMETER | 0.086 INCHES | SURFACE FINISH | 32.0 MICROINCHES GRIP | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE 2 OR TYPE 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | SURFACE TREATMENT | PASSIVATE OVERALL | THREAD LENGTH | 0.165 INCHES NOMINAL | THREAD CLASS | 2A | THREAD DIRECTION | RIGHT-HAND | THREAD SERIES DESIGNATOR | UNC | THREAD QUANTITY PER INCH | 56 |
|
|