|
|
|
National Stock Number:
5305-00-144-3959
Federal Supply Class:
5305
National Item Identification Number:
001443959
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| AN507-632R28 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | FFS92ANDTYPE3ANDSTYLE3 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS24693-38 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS24693-38 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 1.750 INCHES NOMINAL | | HEAD DIAMETER | 0.249 INCHES MINIMUM AND 0.279 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MINIMUM TENSILE STRENGTH | 55000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE | | SCREW MATERIAL | STEEL OR STEEL COMP 1010 | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE | | SCREW SURFACE TREATMENT | CADMIUM | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNC | | THREAD QUANTITY PER INCH | 32 |
|
|