|
|
|
National Stock Number:
5305-00-144-0508
Federal Supply Class:
5305
National Item Identification Number:
001440508
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| NAS1121-6H | 04348 | LAWRENCE ENGINEERING AND SUPPLY INC | | NAS1121-6H | 07851 | NOR-CAL SUPPLY CO | | NAS1121-6H | 08938 | AIR INDUSTRIES CO INC | | NAS1121-6H | 17446 | HUCK INTERNATIONAL, INC | | NAS1121-6H | 30485 | QUALIFIED AIR COMPONENTS INC. | | NAS1121-6H | 30902 | F AND C SALES INC | | NAS1121-6H | 50568 | APCOM INC | | NAS1121-6H | 53606 | PLASTIC AND METAL PRODUCTS CORPORATION | | NAS1121-6H | 56878 | SPS TECHNOLOGIES, LLC | | NAS1121-6H | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | NAS1121-6H | 73197 | HI-SHEAR CORPORATION | | NAS1121-6H | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NAS1121-6H | 80539 | SPS TECHNOLOGIES, LLC | | NAS1121-6H | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | NAS1121-6H | 97928 | HUCK INTL INC | | NAS1121-6H | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| GRIP DIAMETER | 0.1365 INCHES MINIMUM AND 0.1375 INCHES MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | HOLE CONFIGURATION STYLE | ROUND | | HOLE DIAMETER | 0.038 INCHES NOMINAL | | HOLE TYPE | DRILLED | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 4037 OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNJC | | THREAD QUANTITY PER INCH | 32 |
|
|