5305-00-144-0338, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-00-144-0338

Federal Supply Class:
5305

National Item Identification Number:
001440338

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

7S37-5-33	43999	THE BOEING COMPANY
HE111-0204-1006	89372	ROCKWELL INTERNATIONAL CORP NORTH AMERICAN AIRCRAFT OPNS

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	2.293 INCHES MINIMUM AND 2.343 INCHES MAXIMUM FIRST HOLE
COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM
FASTENER LENGTH	2.422 INCHES MINIMUM AND 2.452 INCHES MAXIMUM
GRIP DIAMETER	0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH	2.052 INCHES MINIMUM AND 2.072 INCHES MAXIMUM
HEAD DIAMETER	0.441 INCHES MINIMUM AND 0.474 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6758,COND D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 4130 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.312 INCHES
PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNF
THREAD QUANTITY PER INCH	24

Click here to Register for Free 30-day Trial