5305-00-143-2541, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-00-143-2541

Federal Supply Class:
5305

National Item Identification Number:
001432541

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

11619009

19207

U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.191 INCHES MINIMUM AND 0.201 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	0.608 INCHES MINIMUM AND 0.618 INCHES MAXIMUM
COUNTERSINK ANGLE	81.0 DEGREES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.843 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.275 INCHES MINIMUM AND 0.285 INCHES MAXIMUM
HEAD DIAMETER	0.722 INCHES MINIMUM AND 0.762 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	FF-S-85,TYPE 1,GRADE 8 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL OVERALL
NOMINAL THREAD DIAMETER	0.375 INCHES
SECOND DIAMETER FROM HEAD	0.375 INCHES NOMINAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.407 INCHES MINIMUM AND 0.427 INCHES MAXIMUM
THREAD QUANTITY PER INCH	16
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial